Saving And Loading Cli Script Files - AudioCodes Mediant 800 User Manual

CHAPTER 48 Configuration File
c. Click Yes to continue (or No to cancel the file load). If you click Yes, the device loads the
file and then resets with a save to flash for the settings to take effect.

Saving and Loading CLI Script Files

You can save and load the device's configuration as a CLI Script file. Saving a CLI Script file can
serve as a backup of your configuration and if needed, you can later load the file to the device to
restore your previous configuration settings. You can also load a CLI Startup Script file.
●
●
●
●
●
●
➢
To save or load a CLI Script file through Web interface:
1. Open the Configuration File page:
● Toolbar: From the Actions drop-down menu, choose Configuration File
● Navigation tree:Setup menu > Administration tab > Maintenance folder >
Configuration File
2. To save the CLI Script file, under the CLI Script group: Click the Save CLI Script File button,
and then save the file to a folder on your computer.
3. To load a CLI Script file, under the CLI Script group, do the following:
a. Click the Browse button, and then browse to and select the file on your computer.
b. Click the Load CLI Script File button; the device loads the file and then resets with a
save to flash.
4. To load a CLI Startup Script file, under the CLI Script group, do the following:
The CLI Startup Script file is not supported when the device operates in HA mode.
When loading a CLI Script file, the device resets only if it contains the reload now
command (on the last line). For more information on this command, refer to the CLI
Reference Guide.
When loading a CLI Startup Script file, the device needs to reset twice for its
settings to take effect.
The saved file includes only parameters whose values you have modified.
To save the CLI Script file to a remote server (TFTP or HTTP/S): # write-and-
backup to <URL with file name>
To save the CLI Script file to a USB stick plugged into the device: # write-and-
backup to usb:///<file name>
Mediant 800 Gateway & E-SBC | User's Manual
- 944 -