AudioCodes Mediant 800 User Manual page 648
Gateways & session border controllers
Hide thumbs
Also See for Mediant 800:
- Reference manual (195 pages) ,
- Configuration manual (81 pages) ,
- Installation manual (64 pages)
Table of Contents
Advertisement
CHAPTER 25 Routing
Parameter
Match
[PREFIX_SrcTrunkGroupID]
[PREFIX_SourcePrefix]
[PREFIX_SrcTags]
dst-phone-pattern
[PREFIX_DestinationPrefix]
Mediant 800 Gateway & E-SBC | User's Manual
■
"QoS Low" = Poor Quality of Service (QoS) of the
destination.
■
"DNS Error" = No DNS resolution. This status is
applicable only when a domain name is used (instead of
■
"Not Available" = Destination is unreachable due to
networking issues.
Defines the Trunk Group from where the call is received.
To denote any Trunk Group, use the asterisk (*) symbol. By
default, no Trunk Group is defined (-1).
Defines the prefix and/or suffix of the calling (source)
telephone number. You can use special notations for
denoting the prefix. For example, [100-199](100,101,105)
100, 101 or 105. To denote any prefix, use the asterisk (*)
symbol (default) or to denote calls without a calling number,
use the $ sign. For a description of available notations, see
Assigns a Dial Plan tag to denote a group of users by calling
(source) number prefixes and/or suffixes.
Note:
■
Tel-to-IP routing. To do this, use the 'Tel-to-IP Dial Plan
■
Defines the called (destination) telephone number.
- 608 -
Description
Tables.
- Quick Links:
- Default Ip Address
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
