Usb Storage Capabilities - AudioCodes Mediant 800 User Manual

Gateways & session border controllers

Hide thumbs Also See for Mediant 800:

Table of Contents

CHAPTER 50 USB Storage Capabilities

USB Storage Capabilities

The device supports USB storage using an external USB hard drive or flash disk (disk on key)

connected to its USB port. The storage capabilities are configured using the CLI and include the

To save network captures to the USB:

# debug capture data physical stop usb

To update the device's firmware from the USB:

# copy firmware from usb:///<cmp file name>

To update the device's configuration from the USB:

# copy ini-file from usb:///<ini configuration file name>

To save the current configuration to the USB:

# copy ini-file to usb:///<ini configuration file name>

Only a single USB storage (formatted to FAT/FAT32) operation is supported at any

Mediant 800 Gateway & E-SBC | User's Manual

Show Quick Links

Table of Contents