AudioCodes Mediant 800 User Manual page 642

CHAPTER 24 Trunk Groups
Parameter
■ "In Service": Indicates that all channels in the Trunk Group are in
service, for example, when the Trunk Group is unlocked or Busy
Out state cleared (see the EnableBusyOut parameter for more
information).
■ "Going Out Of Service": Appears as soon as you choose the
Lock command and indicates that the device is starting to lock
the Trunk Group and take channels out of service.
■ "Going Out Of Service (<duration remaining of graceful period>
sec / <number of calls still active> calls)": Appears when the
device is locking the Trunk Group and indicates the number of
buys channels and the time remaining until the graceful period
ends, after which the device locks the channels regardless of
whether the call has ended or not.
■ "Out Of Service": All fully configured trunks in the Trunk Group
are out of service, for example, when the Trunk Group is locked
or in Busy Out state (see the EnableBusyOut parameter).
- 602 -
Mediant 800 Gateway & E-SBC | User's Manual
Description