AudioCodes Mediant 800 User Manual page 1367

Gateways & session border controllers
Hide thumbs Also See for Mediant 800:
Table of Contents

Advertisement

CHAPTER 72    Configuration Parameters Reference
'MLPP Default Service Domain'
mlpp-dflt-srv-domain
[MLPPDefaultServiceDomain]
'Precedence Ringing Type'
precedence-ringing
[PrecedenceRingingType]
e911-mlpp-bhvr
[E911MLPPBehavior]
Parameter
Mediant 800 Gateway & E-SBC | User's Manual
Description
The MLPP network identifier is sent in the Facility IE of
the ISDN Setup message. For example:
MLPPNetworkIdentifier set to default (i.e., USA,
1):
PlaceCall- MLPPNetworkID:0100
MlppServiceDomain:123abc,
MlppPrecLevel:5
Fac(1c): 91 a1 15 02 01 05 02 01 19 30
0d 0a 01 05 0a 01 01 04 05 01 00 12 3a
bc
MLPPNetworkIdentifier set to 490:
PlaceCall- MLPPNetworkID:9004
MlppServiceDomain:123abc,
MlppPrecLevel:5
Fac(1c): 91 a1 15 02 01 0a 02 01 19 30
0d 0a 01 05 0a 01 01 04 05 90 04 12 3a
bc
Note: The parameter is applicable only to digital
interfaces.
Defines the MLPP default service domain string. If the
device receives a non-MLPP ISDN incoming call
(without a Precedence IE), it uses the parameter (if
different than "FFFFFF") as a Service domain in the
SIP Resource-Priority header in outgoing (Tel-to-IP
calls) INVITE messages. The parameter is used in
conjunction with the parameter SIPDefaultCallPriority.
If MLPPDefaultServiceDomain is set to 'FFFFFF', the
device interworks the non-MLPP ISDN call to non-
MLPP SIP call, and the outgoing INVITE does not
contain the Resource-Priority header.
The valid value is a 6 hexadecimal digits. The default is
"000000".
Note:
The parameter is applicable only to the MLPP NI-2
ISDN variant with CallPriorityMode set to 1.
The parameter is applicable only to digital
interfaces.
Defines the index of the Precedence Ringing tone in
the Call Progress Tones (CPT) file. This tone is used
when the parameter CallPriorityMode is set to 1 and a
Precedence call is received from the IP side.
The valid range is -1 to 16. The default is -1 (i.e., plays
standard ringing tone).
Note: The parameter is applicable only to analog
interfaces.
Defines the E911 (or Emergency Telecommunication
Services/ETS) MLPP Preemption mode:
- 1327 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-sbc

Table of Contents