Syslog Fields For Answering Machine Detection (Amd); Snmp Alarms In Syslog Messages - AudioCodes Mediant 800 User Manual

CHAPTER 62 Syslog and Debug Recording
Error Abbreviation
PD
OR
PH
PL
RB
RD
RO
RP
RS
UF

Syslog Fields for Answering Machine Detection (AMD)

The Syslog message can include information relating to the Answering Machine Detection (AMD)
feature. AMD is used to detect whether a human (including a fax machine), an answering machine,
silence, or answering machine beeps have answered the call on the remote side.
■ AMDSignal – the field can acquire one of the following values:
● voice (V)
● answer machine (A)
● silence (S)
● unknown (U)
■ AMDDecisionProbability – probability (in %) success that correctly detects answering type
Below is an example of such a Syslog message with AMD information:
CallMachine:EVENT_DETECTED_EV - AMDSignal = <type – V/A/S/U>,
AMDDecisionProbability = <percentage> %
If there is no AMD detection, the AMDSignal field is shown empty (i.e. AMDSignal = ).
For more information on the AMD feature, see

SNMP Alarms in Syslog Messages

SNMP alerts are sent to the Syslog server using the following formats:
■ Raised Alarms: RAISE-ALARM: <Alarm Name>; Textual Description: <Textual
Description>; Severity <Alarm Severity>; Source <Alarm Source>; Unique ID: <Alarm Unique
ID >.
If additional information exists in the alarm, then these are also added: Additional Info1:/
Additional Info2:/ Additional Info3
The Messages' Severity is as follows:
Error Name Description
RTP Packet Duplicated
DSP JB Overrun
Packet Header Error
RTP Packet Loss
Counts the number of BFI Frames Received From The Host
No Available Release Descriptor
RTP Reorder
Unknown RTP Payload Type
RTP SSRC Error
Unrecognized Fax Relay Command
Answering Machine Detection
- 1107 -
Mediant 800 Gateway & E-SBC | User's Manual
(AMD).