Call Setup Rule Examples - AudioCodes Mediant 800 User Manual

CHAPTER 20 SIP Definitions
Parameter

Call Setup Rule Examples

Below are configuration examples for using Call Setup Rules.
■ Example 1: The example configures the device to replace (manipulate) the incoming call's
source number with a number retrieved from the AD by an LDAP query. The device queries the
AD server for the attribute record, "telephoneNumber" whose value is the same as the received
source number (e.g., "telephoneNumber =4064"). If such an Attribute exists, the device
retrieves the number of the attribute record, "alternateNumber" and uses this number as the
source number.
● Call Setup Rules table:
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
● IP-to-IP Routing table: A single routing rule is assigned the Call Setup Rule Set ID.
◆
■ Example 2: The example configures the device to replace (manipulate) the incoming call's
calling name (caller ID) with a name retrieved from the AD by an LDAP query. The device
queries the AD server for the attribute record, "telephoneNumber" whose value is the same as
the received source number (e.g., "telephoneNumber =5098"). If such an attribute is found, the
device retrieves the name from the attribute record, "displayName" and uses this as the calling
name in the incoming call.
● Call Setup Rules table:
◆
◆
◆
◆
◆
◆
◆
◆
◆
■ srctags
■ http.response.body
■ application/x-www-form-urlencoded (for HTTP Content-Type
header in HTTP requests)
■ true (if the 'Action Type' is set to Exit)
■ false (if the 'Action Type' is set to Exit)
'Rules Set ID': 1
'Request Type': LDAP
'Request Target': LDAP-DC-CORP
'Request Key': 'telephoneNumber=' + param.call.src.user
'Attributes to Get': alternateNumber
'Row Role': Use Current Condition
'Condition': ldap.attr. alternateNumber exists
'Action Subject': param.call.src.user
'Action Type': Modify
'Action Value': ldap.attr. alternateNumber
(Index 1) 'Call Setup Rules Set ID': 1
'Rules Set ID': 2
'Request Type': LDAP
'Request Target': LDAP-DC-CORP
'Request Key': 'telephoneNumber=' + param.call.src.user
'Attributes to Get': displayName
'Row Role': Use Current Condition
'Condition': ldap.attr. displayName exists
'Action Subject': param.call.src.name
'Action Type': Modify
Mediant 800 Gateway & E-SBC | User's Manual
Description
- 510 -