CHAPTER 61 Reporting Information to External Party
Field
Termination
Side
RADIUS
[435]
Termination
Side Yes No
[436]
Termination
Side
[409]
Transport
Type
[421]
■
The field is included in the default CDR.
■
The field is applicable only to "CALL_END" CDR Report Types.
■
The field is applicable only to SBC signaling and Gateway CDRs.
■
The default field title is "TrmReason".
■
The maximum number of characters for Syslog tabular alignment is 40.
Displays the party that terminated the call. The field value is a string:
■
"originate": SBC incoming leg or IP side for Gateway calls
■
"answer": SBC outgoing leg or Tel side for Gateway calls
Note:
■
The field is included in the default CDR.
■
The field is mainly relevant to RADIUS CDRs, but can also be used in
Syslog and Local Storage.
■
The default field title is "terminator=".
■
The maximum number of characters for Syslog tabular alignment is 10.
Displays the party that terminated the call. The field value is a string:
■
"yes": SBC outgoing leg or Tel side for Gateway calls
■
"no": SBC incoming leg or IP side for Gateway calls
The field is applicable to RADIUS CDRs
Note:
■
The field is included in the default CDR.
■
The field is mainly relevant to RADIUS CDRs, but can also be used in
Syslog and Local Storage.
■
The default field title is "terminator=" (e.g., "terminator=yes").
■
The maximum number of characters for Syslog tabular alignment is 5.
Displays the party that terminated the call. The field value is a string:
■
"LCL": SBC Outgoing leg or Tel side.
■
"RMT": SBC Incoming leg or IP side.
■
"UNKN": Unknown
For example, if the Orig field is "RMT" and this Termination Side field is "LCL",
then the called party ended the call.
Note:
■
The field is included in the default CDR.
■
The field is applicable only to "CALL_END" CDR Report Types.
■
The field is applicable only to SBC signaling and Gateway CDRs.
■
The default field title is "TrmSd".
■
The maximum number of characters for Syslog tabular alignment is 5.
Displays the SIP signaling transport type protocol. The field value is a string:
■
"UDP"
■
"TCP"
■
"TLS"
Note:
■
The field is included in the default CDR.
- 1075 -
Mediant 800 Gateway & E-SBC | User's Manual
Description