Configuring Sbc User Information - AudioCodes Mediant 800 User Manual

CHAPTER 20 SIP Definitions
You can load the User Information file using any of the following methods:
■ Web interface - User Information table (see
through Web Interface
■ CLI - gateway user-info-table import-csv-from (see
Table through CLI
■ Automatic Update mechanism - [GWUserInfoFileUrl] parameter
For backward compatibility only, load the User Information file using the Auxiliary
Files page. Configure users with the following syntax:
[GW]
FORMAT PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
For example:
[GW]
FORMAT PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
4040,7362400,John,johnd,2798
4041,7362401,Sue,suep,1234
Make sure that the last line in the file ends with a carriage return (i.e., press the Enter
key).
When you load the file, the device automatically populates the User Information table
with the file's contents and deletes all previous entries in the table.

Configuring SBC User Information

The User Information table lets you configure up to 800SBC users. You can use the table for the
following:
■ Registering each user to an external registrar server.
■ Authenticating (for any SIP request and as a client) each user if challenged by an external
server.
■ Authenticating as a server incoming user requests (for SBC security).
If the device registers on behalf of users and the users do not perform registration, any SIP request
destined to the user is routed to the Proxy Set associated with the user's IP Group.
The User Information table can be configured using any of the following methods:
■ Web interface (see
■ CLI (see
■ Loadable User Information file (see
on page 494)
on page 496)
Configuring SBC User Info Table through Web Interface)
Configuring SBC User Info Table through CLI)
Mediant 800 Gateway & E-SBC | User's Manual
Configuring Gateway User Information Table
Configuring Gateway User Information
Configuring SBC User Info Table in Loadable Text File)
- 498 -