AudioCodes Mediant 800 User Manual page 1428

CHAPTER 72 Configuration Parameters Reference
'Send Screening Indicator to ISDN'
[ScreeningInd2ISDN]
'Copy Destination Number to Redirect Number'
cp-dst-nb-2-redir-nb
[CopyDest2RedirectNumber]
Parameter
- 1388 -
Mediant 800 Gateway & E-SBC | User's Manual
Description
■ [-1] Not Configured = (Default) Not
configured (interworking from ISDN to
IP) or set to 0 for CAS.
■ [0] User Provided = CPN set by user,
but not screened (verified).
■ [1] User Passed = CPN set by user,
verified and passed.
■ [2] User Failed = CPN set by user, and
verification failed.
■ [3] Network Provided = CPN set by
network.
Note:
■ The parameter is applicable only if the
Remote Party ID (RPID) header is
enabled.
■ The parameter is applicable only to
digital interfaces.
Overrides the screening indicator of the
calling party's number for IP-to-Tel ISDN
calls.
■ [-1] Not Configured = (Default) Not
configured (interworking from IP to
ISDN).
■ [0] User Provided = user provided, not
screened.
■ [1] User Passed = user provided,
verified and passed.
■ [2] User Failed = user provided, verified
and failed.
■ [3] Network Provided = network
provided
Note: The parameter is applicable only to
digital interfaces.
Enables the device to copy the called
number (from the received ISDN message
for digital interfaces) to the outgoing SIP
Diversion header for Tel-to-IP calls (even if a
Redirecting Number IE is not received in the
ISDN Setup message for digital interfaces).
Therefore, the called number is used as a
redirect number. Call redirection information
is typically used for Unified Messaging and
voice mail services to identify the recipient
of a message.
■ [0] Don't copy = (Default) Disable.