AudioCodes Mediant 800 User Manual page 1242

CHAPTER 72 Configuration Parameters Reference
'New RTP Stream Packets'
[NewRtpStreamPackets]
'New RTCP Stream Packets'
[NewRtcpStreamPackets]
'New SRTP Stream Packets'
[NewSRTPStreamPackets]
'New SRTCP Stream Packets'
[NewSRTCPStreamPackets]
'Timeout To Relatch RTP'
[TimeoutToRelatchRTPMsec]
'Timeout To Relatch SRTP'
[TimeoutToRelatchSRTPMsec]
'Timeout To Relatch Silence'
[TimeoutToRelatchSilenceMsec]
'Timeout To Relatch RTCP'
[TimeoutToRelatchRTCPMsec]
'Fax Relay Rx/Tx Timeout'
[FaxRelayTimeoutSec]
Parameter
Mediant 800 Gateway & E-SBC | User's Manual
Description
Defines the minimum number of continuous RTP packets
received by the device's channel to allow latching onto the
new incoming stream.
The valid range is 0 to 20. The default is 3. If set to 0, the
device is left exposed to attacks against multiple packet
streams.
Defines the minimum number of continuous RTCP
packets received by the device's channel to allow latching
onto the new incoming stream.
The valid range is 0 to 20. The default is 3. If set to 0, the
device is left exposed to attacks against multiple packet
streams.
Defines the minimum number of continuous SRTP
packets received by the device's channel to allow latching
onto the new incoming stream.
The valid range is 0 to 20. The default is 3. If set to 0, the
device is left exposed to attacks against multiple packet
streams.
Defines the minimum number of continuous SRTCP
packets received by the device's channel to allow latching
onto the new incoming stream.
The valid range is 0 to 20. The default is 3. If set to 0, the
device is left exposed to attacks against multiple packet
streams.
Defines a period (msec) during which if no packets are
received from the current RTP session, the channel can
re-latch onto another stream.
The valid range is any value from 0. The default is 200.
Defines a period (msec) during which if no packets are
received from the current SRTP session, the channel can
re-latch onto another stream.
The valid range is any value from 0. The default is 200.
Defines a period (msec) during which if no packets are
received from the current RTP/SRTP session and the
channel is in silence mode, the channel can re-latch onto
another stream.
The valid range is any value from 0. The default is 200.
Defines a period (msec) during which if no packets are
received from the current RTCP session, the channel can
re-latch onto another RTCP stream.
The valid range is any value from 0. The default is 10,000.
Defines a period (sec) during which if no T.38 packets are
received or sent from the current T.38 fax relay session,
the channel can re-latch onto another stream.
- 1202 -