AudioCodes Mediant 800 User Manual page 564

CHAPTER 20 SIP Definitions
2. In the IP Groups table, configure your IP Groups. Make sure that you assign the source IP
Group with the Dial Plan that you configured in Step 1 and that you configure each destination
IP Group with one of the required Dial Plan tags. If the tag has a value, include it as well. In our
example, we will configure three IP Groups:
Parameter
Name
Dial Plan
Tags
3. In the IP-to-IP Routing table, configure a routing rule where the 'Destination Type' parameter is
configured to Destination Tag and the 'Routing Tag Name' to one of your Dial Plan tags. In our
example, the tag "Country" is used:
Name
Source IP Group
Destination Type
Routing Tag Name
Index 0
HQ
Dial Plan 1
- Country=England
Parameter
- 524 -
Mediant 800 Gateway & E-SBC | User's Manual
Index 1
ENG
-
Index 0
Europe
HQ
Destination Tag
Country
Index 2
BEL
-
Country=Belgium