AudioCodes Mediant 800 User Manual page 851

CHAPTER 34 Routing SBC
● SIP Interface for leg interfacing with proxy server (specific local UDP ports are later taken
from this port range):
Index
Name
Network Interface
UDP Port
Additional UDP Ports
For guidelines on configuring the 'Additional UDP Ports' parameter (SIPInterface_
AdditionalUDPPorts), see
2. Open the IP Groups table (see
Groups:
● IP Group for the first IP PBX ("Type" and "Port" tags are later used to identify the IP PBX
and assign it a local UDP port 6001 on the leg interfacing with the proxy server):
Index
Name
Type
SBC Advanced
Call Setup Rules Set ID
Tags
● IP Group for the second IP PBX ("Type" and "Port" tags are later used to identify the IP
PBX and assign it a local UDP port 6002 on the leg interfacing with the proxy server):
Index
Name
Type
SBC Advanced
Call Setup Rules Set ID
Tags
● IP Group for the third IP PBX ("Type" and "Port" tags are later used to identify the IP PBX
and assign it a local UDP port 6003 on the leg interfacing with the proxy server):
Mediant 800 Gateway & E-SBC | User's Manual
General
2
ITSP
LAN
5060
6000-7000
Configuring SIP Interfaces.
Configuring IP Groups), and then configure the following IP
General
1
PBX-1
Server
1
Type=PBX;Port=6001
General
2
PBX-2
Server
1
Type=PBX;Port=6002
- 811 -