AudioCodes Mediant 800 User Manual page 1061

CHAPTER 58 Viewing VoIP Status
Call End Time
Endpoint Type
IP Group
Caller
Callee
Direction
Remote IP
Duration
Termination Reason
Session ID
Table 58-7: SBC CDR History Table
Field
Displays the time at which the call ended. The time is
displayed in the format, hh:mm:ss, where hh is the hour,
mm the minutes and ss the seconds (e.g., 15:06:36).
Indicates the type of CDR:
■
■
Displays the IP Group of the leg for which the CDR was
generated.
Displays the phone number (source URI user@host) of the
party who made the call.
Displays the phone number (destination URI user@host) of
the party to whom the call was made.
Displays the direction of the call:
■
■
Displays the IP address of the call party. For an "Incoming"
call, this is the source IP address; for an "Outgoing" call,
this is the destination IP address.
Displays the duration of the call, displayed in the format
hh:mm:ss, where hh is hours, mm minutes and ss seconds.
For example, 00:01:20 denotes 1 minute and 20 seconds.
Displays the reason for the call being released (ended). For
example, "NORMAL_CALL_CLEAR" indicates a normal
termination.
Displays the SIP session ID of the call.
Mediant 800 Gateway & E-SBC | User's Manual
Description
"SBC": CDR belongs to an SBC call.
"TEST": CDR belongs to a Test call.
"Incoming"
"Outgoing"
- 1021 -