AudioCodes Mediant 800 User Manual page 1457

CHAPTER 72 Configuration Parameters Reference
configure voip > sbc settings >
sbc-keep-call-id
[SBCKeepOriginalCallId]
'Routing Timeout'
configure voip > sbc settings >
sbc-routing-timeout
[SbcRoutingTimeout]
'SBC GRUU Mode'
configure voip > sbc settings >
sbc-gruu-mode
[SBCGruuMode]
Parameter
- 1417 -
Mediant 800 Gateway & E-SBC | User's Manual
Description
Global parameter that enables the device to
use the same call identification (SIP Call-ID
header value) received in incoming
messages for the call identification in
outgoing messages. The call identification
value is contained in the SIP Call-ID
header.
You can also configure the feature per
specific calls, using IP Profiles. For a
detailed description of the parameter and for
configuring the feature in the IP Profiles
table, see Configuring IP
Defines the maximum duration (in seconds)
that the device is prepared to wait for a
response from external servers when a
routing rule is configured to query an
external server (e.g., LDAP server) on
whose response the device uses to
determine the routing destination.
The valid value is 0 to 60. The default is 10.
For more information, see
Routing Response Timeout
Determines the Globally Routable User
Agent (UA) URI (GRUU) support,
according to RFC 5627.
■ [0] None = No GRUU is supplied to
users.
■ [1] As Proxy = (Default) The device
provides same GRUU types as the
proxy provided the device's GRUU
clients.
■ [2] Temporary only = Supply only
temporary GRUU to users. (Currently
not supported.)
■ [3] Public only = The device provides
only public GRUU to users.
■ [4] Both = The device provides
temporary and public GRUU to users.
(Currently not supported.)
Profiles.
Configuring a
on page 814.