AudioCodes Mediant 800 User Manual page 548

CHAPTER 20 SIP Definitions
Parameter
'Row Role'
row-role
[CallSetupRules_
RowRole]
'Condition'
condition
[CallSetupRules_
Condition]
Action
'Action Subject'
action-subject
[CallSetupRules_
ActionSubject]
■ The device saves the retrieved attributes' values for future use in
other rules until the next LDAP query or until the call is connected.
Thus, the device does not need to re-query the same attributes.
Determines which condition must be met in order for this rule to be
performed.
■ [0] Use Current Condition = The Condition configured for this rule
must be matched in order to perform the configured action (default).
■ [1] Use Previous Condition = The Condition configured for the
rule located directly above this rule in the Call Setup table must be
matched in order to perform the configured action. This option lets
you configure multiple actions for the same Condition.
Defines the condition that must exist for the device to perform the
action.
The valid value is a string of up to 200 characters (case-insensitive).
Regular Expression (regex) can also be used. You can also use the
built-in syntax editor to help you configure the field. Click the Editor
button located alongside the field to open the Editor, and then simply
follow the on-screen instructions.
Examples:
■ LDAP:
✔
ldap.attr.mobile exists (if Attribute "mobile" exists in AD)
✔
param.call.dst.user == ldap.attr.msRTCSIP-PrivateLine (if
called number is the same as the number in the Attribute
"msRTCSIP-PrivateLine")
✔
ldap.found !exists (if LDAP record not found)
✔
ldap.err exists (if LDAP error exists)
■ Dial Plan:
✔
dialplan.found exists (if Dial Plan exists)
✔
dialplan.found !exists (if Dial Plan queried key not found)
✔
dialplan.result=='uk' (if corresponding tag of the searched key
is "uk")
■ ENUM:
✔
enum.found exists (if ENUM record of E.164 number exists)
■ HTTP GET or HTTP POST:
● http.response.status == '200' (if the HTTP server responds
with a 200 OK)
Defines the element (e.g., SIP header, SIP parameter, SIP body, or
Dial Plan tag) upon which you want to perform the action if the
condition, configured in the 'Condition' parameter (see above) is met.
The valid value is a string of up to 100 characters (case-insensitive).
You can use the built-in syntax editor to help you configure the field.
Click the Editor button located alongside the field to open the Editor,
and then simply follow the on-screen instructions.
Examples:
- 508 -
Mediant 800 Gateway & E-SBC | User's Manual
Description