Debugging Web Services - AudioCodes Mediant 800 User Manual
Gateways & session border controllers
Hide thumbs
Also See for Mediant 800:
- Reference manual (195 pages) ,
- Configuration manual (81 pages) ,
- Installation manual (64 pages)
Table of Contents
Advertisement
CHAPTER 65 Debugging Web Services
65
Debugging Web Services
If you have configured remote Web services (see
debugging of the remote HTTP clients. You can configure the debug level from 1 to 3, where 3 is the
most detailed. The debug messages are sent to the Syslog server.
➢
To configure debugging of Web services:
1.
Open the Web Service Settings page (Setup menu > IP Network tab > Web Services folder >
Web Service Settings).
2.
In the 'Debug Level' field (RestDebugMode), enter the debug level (or disable debugging by
configuring it to 0):
3.
Click Apply.
Mediant 800 Gateway & E-SBC | User's Manual
Remote Web Services
- 1122 -
), you can enable
- Quick Links:
- Default Ip Address
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
