CHAPTER 20 SIP Definitions
4.
Open the IP-to-Tel Routing table (see
then configure a routing rule with the required destination and whose matching characteristics
include the tag(s) that you configured in your Dial Plan for IP-to-Tel routing. The tags are
assigned using the 'Source Tag' and 'Destination Tag' parameters. In our example, configure
two routing rules:
●
Routing rule 1:
◆
◆
◆
●
Routing rule 2:
◆
◆
◆
Using Dial Plan Tags for Message Manipulation
You can use Dial Plan tags (srctags and dsttags) in Message Manipulation rules, configured in the
Message Manipulations table (see
only in the 'Condition' and 'Action Value' fields. For example, you can configure a rule that adds the
SIP header "City" with the value "ny" (i.e., City: ny) to all outgoing SIP INVITE messages
associated with the source tag "ny":
Dial Plan tags cannot be modified using Message Manipulation rules.
'Destination Tag': NYPSP0
'Destination Type': Trunk Group
'Trunk Group ID': 1
'Destination Tag': NYPSP1
'Destination Type': Trunk Group
'Trunk Group ID': 2
Configuring SIP Message
Mediant 800 Gateway & E-SBC | User's Manual
Configuring IP-to-Tel Routing Rules
Manipulation). The tags can be used
- 529 -
on page 614), and