AudioCodes Mediant 800 User Manual page 742

CHAPTER 28 Configuring Supplementary Services
3. Configure a supplementary service according to the parameters described in the table below.
4. Click Apply.
The figure below displays an example of multiple-line extensions configured in the Supplementary
Services table:
You can also register and un-register an endpoint configured in the table:
➢
To register or un-register an endpoint:
1. In the Trunk Group Settings table (see
registration method using the 'Registration Mode' parameter.
2. In the Supplementary Services table, select the required endpoint.
3. From the 'Action' drop-down list, select Register. To unregister the endpoint, select Un-
Register.
Table 28-6: Supplementary Services Table Parameter Description
Parameter
General
'Index'
[ISDNSuppServ_Index]
'Global Phone Number'
phone-number
[ISDNSuppServ_
PhoneNumber]
Configuring Trunk Group
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a global telephone extension number for the endpoint.
The global number is used for the following functionality:
■ Endpoint registration
■ IP-to-Tel routing
■ Mapping between local and global (E.164) numbers between
Tel and IP sides respectively
- 702 -
Mediant 800 Gateway & E-SBC | User's Manual
Settings), configure the
Description