CHAPTER 59 Viewing PSTN Status
59
Viewing PSTN Status
This section describes how to view PSTN-related status.
Viewing Trunks & Channels Status
You can view the status of the device's PSTN trunks and corresponding channels in the Web
interface. It also enables you to view trunk configuration and channel information.
➢
To view trunk and channel status:
1.
Open the Trunks & Channels Status page, by doing one of the following:
●
Navigation tree: Monitor menu > Monitor tab > PSTN Status folder > Trunks &
Channels Status.
●
Monitor home page:
i.
ii.
iii.
The number of displayed trunks and channels depends on configuration.
The status of the trunks is depicted by color-coded icons, as described in the table below:
Table 59-1: Description of Color-Coded Icons for Trunk Status
Icon
The status of the channels is depicted by color-coded icons, as described in the table below:
Open the Monitor home page (see
On the graphical display of the device, click a PSTN port; a shortcut menu appears.
From the shortcut menu, choose Port Status:
Color
Label
Gray
Green
Yellow
Red
Blue
Light Orange
Dark Orange
Purple
Mediant 800 Gateway & E-SBC | User's Manual
Viewing Device Status on Monitor
Trunk
Disabled
Active - OK
RAI Alarm
LOS / LOF Alarm
AIS Alarm
D-Channel Alarm
NFAS Alarm
Lower Layer Down (DS3 physical layer is disabled)
- 1022 -
Page).