AudioCodes Mediant 800 User Manual page 522

CHAPTER 20 SIP Definitions
➢
To register or un-register an Account:
1. In the table, select the required Account entry row.
2. From the Action drop-down list, choose one of the following commands:
● Register to register the Account.
● Un-Register to un-register the Account.
To view Account registration status, see
Parameter
General
'Index'
'Name'
account-name
[Account_AccountName]
'Served Trunk Group'
served-trunk-group
[Account_ServedTrunkGroup]
'Application Type'
application-type
[Account_ApplicationType]
'Served IP Group'
served-ip-group-name
[Account_
ServedIPGroupName]
'Serving IP Group'
serving-ip-group-name
[Account_
ServingIPGroupName]
Table 20-1: Accounts Table Parameter Descriptions
Defines an index for the new table row.
Note: Each row must be configured with a unique index.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters.
Note: Each row must be configured with a unique name.
Defines the Trunk Group that you want to register and/or
authenticate.
■
■
Note: The parameter is applicable only to the Gateway
application.
Defines the application type:
■
■
Defines the IP Group (e.g., IP-PBX) that you want to
register and/or authenticate upon its behalf.
Note:
■
■
■
Defines the IP Group (Serving IP Group) to where the
device sends the SIP REGISTER requests (if enabled) for
registration and authentication (of the Served IP Group).
For the Gateway application:
■
Mediant 800 Gateway & E-SBC | User's Manual
Viewing Registration Status.
Description
For Tel-to-IP calls, the served Trunk Group is the
source Trunk Group from where the call originated.
For IP-to-Tel calls, the served Trunk Group is the Trunk
Group to where the call is sent.
[0] GW = (Default) Gateway application.
[2] SBC = SBC application.
The parameter is applicable only to the SBC
application.
By default, all IP Groups are displayed. However, if you
filter the Web display by SRD (using the SRD Filter
box), only IP Groups associated with the filtered SRD
are displayed.
The parameter is mandatory.
Tel-to-IP calls: The serving IP Group is the destination
IP Group configured in the Trunk Group Settings table
or Tel-to-IP Routing table (see
Routing Rules).
- 482 -
Configuring Tel-to-IP