Configure Velocity Measurement Unit - Emerson Micro Motion 5700 Configuration And Use Manual

Configuration and Use Manual
MMI-20029769
• Default: psi
4.7.1 Options for Pressure Measurement Unit
The transmitter provides a standard set of measurement units for Pressure Measurement Unit. Different
communications tools may use different labels for the units. In most applications, set Pressure Measurement
Unit to match the pressure measurement unit used by the remote device.
Unit description
Feet water @ 68 °F
Inches water @ 4 °C
Inches water @ 60 °F
Inches water @ 68 °F
Millimeters water @ 4 °C
Millimeters water @ 68 °F
Millimeters mercury @ 0 °C
Inches mercury @ 0 °C
Pounds per square inch
Bar
Millibar
Grams per square centimeter
Kilograms per square centimeter
Pascals
Kilopascals
Megapascals
Torr @ 0 °C
Atmospheres

4.8 Configure Velocity Measurement Unit

Display Menu > Configuration > Process Measurement > Velocity > Units
ProLink III Device Tools > Configuration > Process Measurement > Velocity > Unit
Web browser Configuration > Process Measurement > Velocity > Unit
Velocity Measurement Unit controls the measurement unit used to report velocity.
Procedure
Set Velocity Measurement Unit to the desired unit.
• Default: m/sec
Configuration and Use Manual
Display
ftH2O @68°F
inH2O @4°C
inH2O @60°F
inH2O @68°F
mmH2O @4°C
mmH2O @68°F
mmHg @0°C
inHg @0°C
psi
bar
mbar
g/cm2
kg/cm2
Pa
kPA
mPA
torr
atm
Configure process measurement
Label
ProLink III Web browser
Ft Water @ 68°F Ft Water @68°F
In Water @ 4°C Not applicable
In Water @ 60°F Not applicable
In Water @ 68°F In Water @68°F
mm Water @ 4°C Not applicable
mm Water @ 68°F mm Water @68°F
mm Mercury @ 0°C mm Mercury @0°C
In Mercury @ 0°C In Mercury @0°C
PSI PSI
bar bar
millibar millibar
g/cm2 g/cm2
kg/cm2 kg/cm2
pascals pascals
Kilopascals Kilopascals
Megapascals Not applicable
Torr @ 0°C Torr @0°C
atms atms
March 2019
49