Operation using the batcher
March 2019
•
Using a web browser: Choose Operations > Batcher > Run Batcher and observe the values
displayed in Current Total and Batch Time.
5. Optional: Pause the batch at any time.
•
Using the display: Choose Menu > Batcher > Run Batch > Batch Control and select Pause.
Using ProLink III: Choose Device Tools > Application Control > Run Batcher and click Pause
•
Batcher.
Using a web browser: Choose Operations > Batcher > Run Batcher and click Pause Batch.
•
Pausing a batch allows you to resume it later.
6. Optional: Resume the batch after it has been paused.
Using the display: Choose Menu > Batcher > Run Batch > Batch Control and select Resume.
•
•
Using ProLink III: Choose Device Tools > Application Control > Run Batcher and click Resume
Batch.
•
Using a web browser: Choose Operations > Batcher > Run Batcher and click Resume Batch.
7. Optional: End the batch manually at any time before it reaches the target.
•
Using the display: Choose Menu > Batcher > Run Batch > Batch Control and select End.
Using ProLink III: Choose Device Tools > Application Control > Run Batcher and click End Batch.
•
•
Using a web browser: Choose Operations > Batcher > Run Batcher and click End Batch.
If you end a batch manually, you will not be able to resume it. You can end the batch while it is running
and while it is paused.
8. If you did not end the batch manually, wait until the batch ends automatically.
•
Using the display: Choose Menu > Batcher > Run Batch > Batch Control.
•
Using ProLink III: Choose Device Tools > Application Control > Run Batcher.
Using a web browser: Choose Operations > Batcher > Run Batcher and click End Batch.
•
The batch ends automatically when it reaches the target or when it reaches the configured maximum
fill time.
9. Optional: Inhibit batch.
•
This function is not available from the display.
Using ProLink III: Choose Device Tools > Application Control > Run Batcher.
•
•
Using a web browser: Choose Operations > Batcher > Run Batcher.
While the Inhibit Batch input is active, a batch will not be allowed to start. Attempting to start a batch
while the batch is inhibited will cause the Start Not Okay alarm to be posted.
10. Optional: Inhibit totalizer.
•
This function is not available from the display.
•
Using ProLink III: Choose Device Tools > Application Control > Run Batcher.
Using a web browser: Choose Operations > Batcher > Run Batcher.
•
152
Configuration and Use Manual
Micro Motion Model 5700 with Ethernet Transmitters
MMI-20029769