Configuration and Use Manual
MMI-20029769
Procedure
1. Power down the transmitter.
2. Remove the cover of the junction box on the transmitter to access the core processor terminals.
Figure 17-1: Removing the cover of the junction box
3. Disconnect the 4-wire cable between the transmitter and the sensor.
4. Identify the core processor terminals inside the transmitter junction box.
Figure 17-2: Core processor terminals inside the transmitter junction box
5. For the 700 core processor only, measure the resistance between the terminal pairs listed here.
Configuration and Use Manual
Troubleshooting
March 2019
229