Configuration and Use Manual
MMI-20029769
17.12.50 Password Not Set
Alert
Configuration Error
Cause
Display security has been enabled but the display password has not been changed from the default value.
Recommended actions
Configure a password or disable display security.
17.12.51 SD Card Failure
Alert
Data Loss Possible
Cause
The transmitter's SD card has failed.
Recommended actions
1. Make sure that the SD card is firmly seated in the socket.
2. Contact customer service.
17.12.52 SD Card Full
Alert
Data Loss Possible
Cause
The transmitter's SD card is 90% full.
Recommended actions
Contact customer service.
17.12.53 Severe Two Phase Flow
Alert
Process Aberration
Cause
The transmitter has detected severe two-phase flow.
Recommended actions
Check your process conditions against the values reported by the device.
Configuration and Use Manual
Troubleshooting
March 2019
227