Log In With A Web Browser Using An Unsecure Connection - Emerson Micro Motion 5700 Configuration And Use Manual

Using a Web browser to configure the transmitter
March 2019
Figure C-1: Transmitter home page
C.4 Log in with a web browser using an unsecure
connection
Prerequisites
To log in to the transmitter with a web browser:
• The PC and transmitter must have been properly configured for their connection type.
• You must know the IP address of the transmitter.
Procedure
1. Enter the IP address of the transmitter in the web browser address bar.
When the transmitter is found, the login page appears.
2. Enter the login credentials.
Two users are predefined. You can change the passwords, but you cannot add or delete users.
260
Configuration and Use Manual
Micro Motion Model 5700 with Ethernet Transmitters
MMI-20029769