Configure Advanced Options For Process Measurement; Configure Response Time; Detect And Report Two-Phase Flow - Emerson Micro Motion 5700 Configuration And Use Manual

Configuration and Use Manual
MMI-20029769
6 Configure advanced options for process
measurement

6.1 Configure Response Time

Menu > Configuration > Process Measurement > Response Time
Display
Device Tools > Configuration > Process Measurement > Response Time
ProLink III
Configuration > Process Measurement > Response Time
Web browser
Response Time controls the speed of various internal processes that are involved in retrieving electronic data
from the sensor and converting it to process data.
Response Time affects all process and diagnostic variables.
Restriction
Response Time is configurable only if you are using the enhanced core processor. If you are using the
standard core processor, Response Time is set to Low Filtering and cannot be changed.
Procedure
Set Response Time as desired.
Option Description
Normal Appropriate for typical applications.
High Filtering Slower response. Appropriate for applications with significant amount of entrained gas or
process noise.
Low Filtering Fastest response. Appropriate for proving or filling applications.
Service Do not select unless directed by Micro Motion personnel.

6.2 Detect and report two-phase flow

Two-phase flow (gas in a liquid process or liquid in a gas process) can cause a variety of process control issues.
The transmitter provides two methods to detect and report or respond to two-phase flow.
6.2.1 Detect two-phase flow using density
Display Menu > Configuration > Process Measurement > Density
ProLink III Device Tools > Configuration > Process Measurement > Density
Web browser Configuration > Process Measurement > Density
Configuration and Use Manual

Configure advanced options for process measurement

March 2019
83