Snow Plow Specifications; Torque Specifications - Dodge D150 1990 Service Manual

Rear wheel drive ram truck
Table of Contents

Advertisement

S P E C I F I C A T I O N S
SNOW PLOW SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
MOTOR SPECIFICATIONS
American Bosch M0551046A
No load (motor not attached to pump) operation:
CAUTION: Do not operate motor continuously for more
than 30 seconds.
Applied Voltage — 12 Volts DC
Max. Current — 24 Amperes
Speed (Min.) — 5900 rpm
With load (pump operating):
CAUTION: Do not operate motor continuously for more
than 5 seconds.
Applied Voltage — 12 Volts DC
Max. Current — 230 Amperes
Prestolite MGL4105
No load (motor not attached to pump) operation:
CAUTION: Do not operate motor continuously for more
than 30 seconds.
Applied Voltage — 10 Volts DC
Max. Current — 45 Amperes
Speed (Min.) — 10,000 rpm
Under Load (pump operating):
CAUTION: Do not operate motor continuously for more
than 5 seconds.
Applied Voltage — 12 Volts DC
Max. Current — 230 Amperes
HYDRAULIC SPECIFICATIONS
PUMP
SOLENOID VALVES A , B, ANP C SPECIFICATIONS
A Coll
Applied Voltage — 12 Volts DC
Current — 0.83 Amperes
Nominal resistance (one ohmmeter probe to coil wire, other
to metal coil cover)—9.0 ± 10% ohms.
B and C Colls
Applied Voltage — 12 Volts DC
Current — 1.24 Amperes
Nominal resistance (one ohmmeter probe to coil wire, other
to metal coil cover)—3.5 ± 1 0 % ohms.
SOLENOID SWITCH
Applied Voltage — 12 Volts DC
Max. Current — 5 Amperes
Nominal resistance (one ohmmeter probe to coil wire, other
to metal foot)—2.65-4.5 ohms.
HYDRAULIC FLUID CAPACITY
NOTE: 1 Quart = 32 Fluid Ounces
Pressure Output (pump relief valve opening pressure
1 6 5 0 ± 5 0 p s i
CROSSOVER RELIEF VALVE
A Reservoir and Pump
Hoses & 1-1/2 x 10 Cylinders
Total
B Reservoir and Pump
Hoses & 1-1/2 x 12 Cylinders
Total
C Reservoir and Pump
Hoses & 2 x 12 Cylinders
Total
28 oz.
16 oz.
1 qt., 12 oz.
(44 oz.)
28 oz.
19 oz.
1 qt., 15 oz.
(47 oz.)
1 qt., 4.5 oz.
(36.5 oz.)
28 oz.
2 qt., 5 oz.
(64.5 oz.)
Opening Pressure 3800 ± 400 psi
J9001-4
TORQUE
SPECIFICATIONS
COMPONENT
SET-TO-TORQUE
RECHECK TORQUE
11.3 N*m (100 in-lbs)
11.3 N*m (100 in-lbs)
11 N » m (95 in-lbs)
5 N » m (45 in-lbs)
11-14 N » m (100-125 in-lbs)
11-14 N » m (100-125 in-lbs)
11-12 N « m (95-105 in-lbs)
5-6 N*m (45-55 in-lbs)
J9001-5

Advertisement

Table of Contents
loading

Table of Contents