Cab Chassis; I.d. And Clearance Lamps For Dual Wheel; Wheel Flare Mounted And Rear Clearance Lamps - Dodge D150 1990 Service Manual

8L - 4 LAMPS
•
CAB CHASSIS MODELS (FIG. 3)
REMOVAL
(1) Disconnect w i r i n g harness.
(2) Remove l a m p m o u n t i n g nuts a n d remove as-
sembly.
ASSEMBLY PR1086
Fig. 3 Tail, Stop, Turn Signal, and Back-Up Lamp
INSTALLATION
(1) Position l a m p t o bracket and i n s t a l l t w o attach-
i n g screws.
(2) Connect w i r i n g harness.
SPORT UTILITY MODELS (FIG. 4)
REMOVAL
(1) Remove assembly attachment screws a n d re-
move lamp assembly.
(2) T w i s t o u t socket.
INSTALLATION
(1) T w i s t i n socket.
(2) Position t h e l a m p and i n s t a l l assembly mount-
i n g screws.
I.D. AND CLEARANCE LAMPS FOR DUAL WHEEL
MODEL
To change bulb, remove lamp.
WHEEL FLARE MOUNTED AND REAR
CLEARANCE LAMPS
(1) P r y o u t r e t a i n i n g clamps.
(2) P u l l lens away f r o m m o u n t i n g plate.
(3) Disconnect electrical connector f r o m bulb a n d
lens assembly (Figs. 5 and 6).
Fig. 4 Tail, Stop, Turn Signal, Rear Side Marker and
Back-Up Lamp
CAB LAMPS
(1) Remove m o u n t i n g screws (Fig. 7).
(2) P u l l lens away from m o u n t i n g plate.
(3) L i f t l a m p u p a n d disconnect wires a n d t w i s t o u t
socket.
To i n s t a l l , reverse t h e removal procedures.
J908L-73
Fig. 5 Rear Wheel Flare Mounted Clearance Lamp