Table of Contents
Advertisement
•
WINDSHIELD WIPER AND WASHER SYSTEMS
8K - 9
BLADE
PIVOT ASSEMBLY
Fig. 6 Wiper Linkage
RIGHT PIVOT
ASSEMBLY
REMOVAL
(1) Remove w i p e r arms.
(2) Remove screws a t t a c h i n g louvered cowl cover to
f i r e w a l l .
(3) Remove cowl cover b y p u l l i n g f o r w a r d w i t h a
slight u p w a r d movement.
(4) Reach t h r o u g h access hole and remove drive
l i n k from r i g h t p i v o t by p r y i n g r e t a i n e r bushing
f r o m pivot p i n w i t h a suitable size screwdriver.
(5) Remove r i g h t p i v o t m o u n t i n g screws.
(6) Remove p i v o t t h r o u g h access hole.
INSTALLATION
(1)
Position
p i v o t
i n t o place,
i n s t a l l m o u n t i n g
screws, and t i g h t e n t o 11 N - m (95 i n . lbs.) torque.
(2) I n s t a l l r i g h t p i v o t p i n i n drive l i n k retainer
bushing by snapping together w i t h channel lock p l i -
ers.
(3) Position cowl cover i n t o place, i n s t a l l m o u n t i n g
screws and t i g h t e n securely.
(4) I n s t a l l w i p e r arms.
WIPER SWITCH REPLACEMENT-STANDARD
COLUMN
(1) Disconnect b a t t e r y negative cable.
(2) Remove 4 screws a t t a c h i n g the lower steering
column cover (Fig. 7). T h e fuse block is attached to
t h i s cover and should be supported when cover is re-
moved.
Fig. 7 Steering Column Cover
(3) O n t h e standard and optional steering wheels
(Figs. 8 a n d 9) remove t w o h o r n pad m o u n t i n g
screws from underside of steering wheel.
(4) P u l l pad u p f r o m wheel and disconnect electri-
cal leads.
(5) Remove pad.
Advertisement
Table of Contents
