Dodge D150 1990 Service Manual page 978

•
AUTOMATIC TRANSMISSION 21 - 127
(30) I n s t a l l t h e governor valves and weights i n t h e
governor body (Fig. 32)
(31) Reinstall a l i g n m e n t tool C-6227-2 a n d set t h e
g e a r t r a i n aside for final assembly.
OVERDRIVE UNIT ASSEMBLY AND ADJUSTMENT
(1) I n s t a l l t h e p a r k i n g p a w l a n d spring i n t h e case
(Fig. 41).
PARKING
PAWL
OVERDRIVE
CASE
8921-262
Fig. 41 Installing Parking Pawl And Spring
(2) I n s t a l l t h e pawl shaft and shaft r e t a i n i n g bolt
(Fig. 19). T i g h t e n t h e bolt t o 27 N * m (20 ft-lbs)
torque.
(3) I n s t a l l t h e reaction p l u g a n d snap r i n g ( F i g .
42). Compress t h e snap r i n g only enough to i n s t a l l i t .
(4) I n s t a l l t h e o u t p u t shaft rear bearing i n t h e
REACTION
PLUG SNAP
RING
SNAP RING
PLIERS
8921-240
Fig. 42 Installing Reaction Plug And Snap Ring
case. M a k e sure the snap r i n g groove i n t h e bearing
outer race is facing t h e front of the case (Fig. 43).
(5) I n s t a l l t h e governor support a n d t h e governor
pressure tubes i n the case (Fig. 44). T h e tubes are
designed to be a slip fit.
(6) I n s t a l l t h e governor support snap r i n g (Fig. 45).
REAR
BEARING
SNAP
GROOVE
TOWARD
FRONT OF
CASE
8921-263
Fig. 43 Installing Output Shaft Rear Bearing
GOVERNOR
SUPPORT
SUP-FIT
TUBES
8921-238
Fig. 44 Installing Governor Support And Oil
Pressure Tubes
SNAP
RING
SCREWDRIVER
8921-264
Fig. 45 Installing Governor Support Snap Ring
(7) I n s t a l l t h e o u t p u t shaft front bearing snap r i n g
i n t h e case.