Table of Contents
Advertisement
•
SPRINGS/SHOCK ABSORBERS
17 - 11
INSTALLATION
(1) Position t h e stabilizer b a r ends over t h e l i n k
rods and i n s t a l l t h e U-shaped support brackets a n d
bolts/nuts (Figs. 15 a n d 16). T i g h t e n t h e bolts/nuts
w i t h 23 N n n (17 ft-lbs/200 in-lbs) torque.
(2) I n s t a l l t h e outer retainers and rubber bushings
on the l i n k rods (Figs. 15 and 16).
(3) I n s t a l l t h e l i n k r o d n u t s (Figs. 15 a n d 16).
T i g h t e n t h e n u t s w i t h 11 N n n (100 in-lbs).
Fig. 16 Stabilizer Bar— 4WD Vehicles
Advertisement
Table of Contents
