Table of Contents
Advertisement
•
POWER MIRRORS
8T - 3
Fig. 3 Door Trim Panel
end o f switch housing and p u s h to depress l o c k i n g
tab. P u l l o u t a n d forward t o remove switch bezel
from door panel.
(3) Remove 2 screws a t b o t t o m front and rear o f
t r i m panel.
(4) Remove screw behind remote handle.
(5) U s i n g a device such as a t r i m stick, p r y t r i m
panel away f r o m door around perimeter.
(6) Roll door watershield away from lower rear cor-
ner o f door t o reveal inside panel access opening.
(7) Reach inside door and disconnect m i r r o r w i r i n g
at connector.
S p r a y grommet
o n m o u n t i n g b r a c k e t
c o v e r
w i t h silicone to a v o i d grommet coming off w h e n
c o v e r i s m o v e d u p o n m i r r o r stem.
(8)
Remove m i r r o r m o u n t i n g bracket cover ( 1
screw) and slide u p on m i r r o r stem (Fig. 4).
(9) Remove 3 m i r r o r m o u n t i n g bracket nuts.
(10) P u l l m i r r o r loose f r o m door, and feed w i r i n g
harness out t h r o u g h hole i n outer door panel.
For I n s t a l l a t i o n , reverse Removal procedure.
Fig. 4 Power Mirror Replacement
Advertisement
Table of Contents
