Table of Contents
Advertisement
8F - 6
RADIO, ANTENNA AND SPEAKERS
•
SERVICE PROCEDURES
INDEX
Page
Door Mounted Speaker
6
Radio Replacement
6
Rear Speaker - Club Cab Pickup
7
Rear Speaker
Rear Speaker
Page
Ramcharger
Standard Cab Pickup
7
7
RADIO REPLACEMENT
REMOVAL
(1) Disconnect fusible l i n k i n engine compartment.
(2)
Remove 2 screws
a n d t h e m a p l a m p ( i f
equipped) (Fig. 9).
(3) Remove 6 screws a t t a c h i n g faceplate t o t h e i n -
strument
panel.
Be sure
t h e screw
below t h e
Heater/C control is removed.
INSTRUMENT
PANEL
INSTRUMENT
CLUSTER
ASSEMBLY
CLUSTER
FACEPLATE
898E-78
Fig. 9 Instrument Cluster Faceplate
(4) Remove two m o u n t i n g screws f r o m front o f r a -
dio (Fig. 10).
(5) P u l l radio o u t o f i n s t r u m e n t panel and discon-
nect w i r i n g and antenna.
(6) Remove screw f r o m g r o u n d strap.
INSTRUMENT
PANEL
(3) I n s e r t radio i n t o panel a n d i n s t a l l m o u n t i n g
screws.
(4) I n s t a l l i n s t r u m e n t cluster bezel.
(5) I n s t a l l map lamp, i f equipped.
(6) Connect fusible l i n k .
DOOR MOUNTED SPEAKER
REMOVAL
(1) Remove remote control handle.
(2) Remove window regulator handle, i f equipped.
(3) Remove p u l l strap i f equipped.
(4) Remove screw a t top of armrest.
(5) U s i n g a t r i m stick or other suitable f l a t tool,
gently p r y t r i m panel away f r o m door.
(6) Remove screws h o l d i n g speaker (Fig. 11).
(7) Disconnect speaker leads.
(8) Remove speaker.
SPEAKER
ASSEMBLY
DOOR TRIM
PANEL
RP910
RF431
Fig. 11 Door Mounted Speaker
INSTALLATION
(1) Connect leads t o speaker.
(2) Position speaker into place, i n s t a l l m o u n t i n g
screws a n d t i g h t e n
securely.
(3) I n s t a l l door t r i m panel.
Fig. 10 Radio to Instrument Panel Mounting
INSTALLATION
(1) I n s t a l l ground strap.
(2) I n s t a l l w i r i n g and antenna.
Advertisement
Table of Contents
