Table of Contents
Advertisement
•
BATTERY/STARTER SERVICE
8B • 3
(8) Clean inside surfaces of t e r m i n a l clamps w i t h a
suitable battery t e r m i n a l cleaniiig tool (Fig. 6). Re-
place damaged or frayed cables and broken t e r m i n a l
clamps.
Fig. 6 Cleaning Battery Cable Terminal
(9) Inspect b a t t e r y for proper or damaged h o l d
down ledge,
(10) I n s t a l l b a t t e r y i n vehicle m a k i n g sure t h a t
battery is properly positioned on battery t r a y ( F i g .
2).
(11) I n s t a l l b a t t e r y h o l d down clamp, m a k i n g sure
t h a t i t is properly positioned on battery, and t i g h t e n
bolt to 12 N*m (100 i n . lbs.).
(12) Place felt grease washer onto Positive ( + ) bat-
tery post.
(13) Connect cable clamps to battery post m a k i n g
sure top of clamp is flush w i t h top of post (Fig. 7).
(14) T i g h t e n clamp n u t securely.
Fig. 7 Battery Cables Disconnected
Advertisement
Table of Contents
