Table of Contents
Advertisement
8E - 20
INSTRUMENT PANEL AND GAUGES
•
(3) I n s t a l l map lamp.
CIGAR LIGHTER (Fig. 5)
REMOVAL
(1) Open ash receiver.
(2) Remove lighter element f r o m shell.
.
(3) Disconnect w i r i n g .
(4) T u r n clamp counterclockwise and remove.
(5) Remove shell t h r o u g h front o f housing.
Installation
(1) I n s t a l l ash t r a y b i n .
(2) Push ash t r a y inwards t o closed position.
HOUSING
Removal
(1) Remove ash t r a y b i n .
(2) Disconnect electrical leads f r o m cigar l i g h t e r .
(3) Remove six screws r e t a i n i n g housing t o panel.
INSTRUMENT
PANEL
BRACE
U-NUT
VIEW IN DIRECTION
OF ARROW A
LIGHTER
ELEMENT
KNOB
ASH TRAY
ASSEMBLY
RB491
Fig. 5 Cigar Lighter and Ash Tray
INSTALLATION
(1) Insert shell t h r o u g h front o f housing.
(2)
I n s t a l l clamp
o n shell, t u r n
clockwise
t i g h t e n securely.
(3) Connect w i r i n g t o shell.
(4) I n s t a l l l i g h t e r element.
(5) I n s t a l l wires and close ash receiver.
ASH TRAY (Fig. 5)
TRAY
Removal
(1) Open ash tray.
(2) Remove ash t r a y b i n .
(4) Remove cigar l i g h t e r from housing.
and
Installation
(1) I n s t a l l cigar l i g h t e r i n housing.
(2) Connect electrical leads to cigar l i g h t e r .
(3) Position housing to panel and i n s t a l l six mount-
i n g screws.
(4) I n s t a l l ash tray b i n .
GLOVE BOX (Fig. 6)
DOOR AND BIN ASSEMBL
Y
Removal
(1) Remove four screws t h a t r e t a i n glovebox to
lower
reinforcement.
Advertisement
Table of Contents
