Table of Contents
Advertisement
8D - 14
IGNITION SYSTEMS
•
HALL EFFECT
PICK-UP
ASSEMBLY
REPLACEMENT
Removal
(1) Remove d i s t r i b u t o r cap. Refer t o " D i s t r i b u t o r
Removal a n d I n s t a l l a t i o n " .
(2) Remove i g n i t i o n rotor
from
d i s t r i b u t o r
shaft
(Fig. 5).
IGNITION ROTOR
DISTRIBUTOR ASSEMBLY
RR8DG32
Fig. 5 Ignition Rotor Removal and Installation
(3) Remove h a l l effect pick-up a t t a c h i n g screws o n
opposite sides o f t h e d i s t r i b u t o r housing a n d care-
f u l l y l i f t t h e h a l l effect pick-up assembly from t h e
d i s t r i b u t o r housing (Fig. 6).
HALL EFFECT
PICK-UP
ALIGNMENT GROVE
DISTRIBUTOR
HOUSING
ATTACHING SCREW
RR8DG33
Fig. 6 Hall Effect Pick-Up Removal and Installation
Installation
To r e i n s t a l l h a l l effect pick-up assembly f o l l o w t h e
preceding procedure i n reverse order.
Advertisement
Table of Contents
