Soft Starter - Siemens SIMOCODE pro Function Manual

Tables, data records
3.2 Assignment of cyclic receive and send data for predefined control functions
3.2.13

Soft starter

Table 3- 16 Assignment of cyclic receive / send data, soft starter
Cycl. receive data
Bit 0.0
Bit 0.1
Bit 0.2
Bit 0.3
Bit 0.4
Bit 0.5
Bit 0.6
Bit 0.7
Bit 1.0
Bit 1.1
Bit 1.2
Bit 1.3
Bit 1.4
Bit 1.5
Bit 1.6
Bit 1.7
Byte 2/3 *) (analog value)
Cycl. send data
Bit 0.0
Bit 0.1
Bit 0.2
Bit 0.3
Bit 0.4
Bit 0.5
Bit 0.6
Bit 0.7
Bit 1.0
Bit 1.1
Bit 1.2
Bit 1.3
Bit 1.4
Bit 1.5
Bit 1.6
Bit 1.7
Byte 2/3 (analog value)
Byte 4/5 *) (analog value)
Byte 6/7 *) (analog value)
Byte 8/9 *) (analog value)
*) for SIMOCODE pro V / pro S, basic type 1 only
140
Not connected
Device parameters → Motor control → Control stations → PLC/PCS [DP] → OFF
Device parameters → Motor control → Control stations → PLC/PCS [DP] → ON
Further function blocks → Standard functions → Test / Reset → Test1 - Input
Further function blocks → Standard functions → Emergency start → Emergency start - Input
Device parameters → Motor control → Control stations → Mode selector S1
Further function blocks → Standard functions → Test / Reset → Reset 1 - Input
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Status - Off
Status - ON>
Event - Prewarning overload (I>115 %)
Not connected
Status - Remote mode
Status - General fault
Status - general warning
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Maximum current I_max
Not connected
Not connected
Not connected
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003