Motor Parameter Object - Siemens SIMOCODE pro Function Manual

3.6.9

Motor Parameter object

Selected device parameters of the SIMOCODE pro V EtherNet/IP device can be read or
written via the Motor Parameter object. This allows the device parameters to be adjusted via
the controller or a connected control system.
● Class code: 0x0099
● Class attributes: 0
● Number of instances: 1
● Object length: 116 bytes
Table 3- 99 General services for the Motor Parameter object
Service code
0x0E
0x10
Table 3- 100 Attributes of instance 1 for the Motor Parameter object
Attribute ID Access
1 Get/ Set
2 Get/ Set
3 Get/ Set
4 Get
5 Get
6 Get/ Set
7 Get/ Set
8 Get/ Set
9 Get/ Set
10 Get/ Set
11 Get/ Set
12 Get/ Set
13 Get/ Set
14 Get/ Set
15 Get/ Set
16 Get/ Set
17 Get/ Set
18 Get/ Set
19 Get/ Set
20 Get/ Set
21 Get/ Set
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Available service
Class Instance
No Yes
No Yes
Designation
Motor protection - set current Is1
Motor protection - set current Is2
Motor protection - class
Reserved
Reserved
Trip level I>
Warning level I>
Trip level I<
Warning level I<
Stalled rotor level
Trip level U<
Warning level U<
Trip level cos phi<
Warning level cos phi<
Trip level P>
Warning level P>
Trip level P<
Warning level P<
EM+ - trip level
EM+ - warning level
TM1 - trip level T>
Service designation Description
Get_Attribute_Single Supplies contents of one attribute
Set_Attribute_Single Changes an attribute value
Data Range of values
type
LINT
1)
LINT
1)
SINT 5, 7, 10, 15, 20, 25,
30, 35, 40
SINT
INT
INT 0 .. 255
INT 0 .. 255
INT 0 .. 255
INT 0 .. 255
INT 0 .. 255
INT 0 .. 255
INT 0 .. 255
SINT 0 .. 100
SINT 0 .. 100
DINT 0..0xFFFFFFFF
DINT 0..0xFFFFFFFF
DINT 0..0xFFFFFFFF
DINT 0..0xFFFFFFFF
DINT 30 .. 40000
DINT 30 .. 40000
DINT 0 .. 65535
Tables, data records
3.6 EtherNet/IP data tables
Unit
10 mA
10 mA
4% / I_s
4% / I_s
4% / I_s
4% / I_s
4% / I_s
8 V
8 V
1 %
1 %
1 W
1 W
1 W
1 W
1 mA
1 mA
1 K
333