I&M0 - Device Identification; I&M1 Data - Siemens SIMOCODE pro Function Manual

Tables, data records
3.5 Modbus data tables
3.5.2.9 I&M0 - device identification
Read-only access to the I&M0 device identification is possible via function codes 03 and 04.
Max. data length per access: 32 registers.
Table 3- 80 I&M (device identification)
Input register Content
Address
0x4000 RESERVED
0x4005 MANUFACTURER_ID
0x4006 ORDER_ID
0x4010 SERIAL_NUMBER
0x4018 HARDWARE_REVISION
0x4019 SOFTWARE_REVISION
0x401B REVISION_COUNTER
0x401C PROFILE_ID
0x401D PROFILE_SPECIFIC_TYPE
0x401E IM_VERSION
0x401F IM_SUPPORTED
Data record length: 64 bytes
1) r/w: Value is read/write; r: Value is read-only
3.5.2.10 I&M1 data
Read access to the I&M1 data is possible via function codes 03 and 04. Write access is
possible via function codes 06 and 16.
Max. data length per access: 32 registers.
Table 3- 81 I&M1D data
Input/holding register
Address
0x4020
0x4025
0x4035 ... 0x403F
Access to these designations via Modbus: read/write
1) r/w: Value is read/write; r: Value is read-only
292
Content
Reserved
Plant identifier
Location designation
Size Coding (H)
10 byte 0x00, ... 0x00
2 bytes 42 = 0x002A (SIEMENS AG)
20 byte "3UF7 ..."
16 byte ASCII
2 bytes
4 byte Va.b.c
2 bytes 0x0000
2 bytes 0x5E10 = VA, GG3 = 0
2 bytes 0x1039 = GG2_MBR
2 bytes 0x0101 (V1.1)
2 bytes 0x000E
Size
10 byte
32 byte
22 byte
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Access
r
r
r
r
r
r
r
r
r
r
r
Access
1)
r
r/w
r/w
SIMOCODE pro - Communication
1)