Siemens SIMOCODE pro Function Manual page 156

Tables, data records
3.3 Tables, PROFIBUS data records
Byte.Bit Status message
14.7
15.0 Events - parameterization
15.1
15.2
15.3
15.4
15.5
15.6
15.7
17.0
17.1
17.2
17.3
17.4
156
Reserved
Event - startup parameter block active
Event - Parameter changes not allowed in
the current operating state
Event -
Device does not support the required
functions
Event - Wrong parameter
Event - Wrong password
Event - Password protection active
Event - Factory settings
Event - Parameterization active
Event - DM-FL configuration mode
Event - DM FL configuration deviation
Event - DM-FL waiting for start-up test
Event - DM FP F PRM error
Reserved
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Information
BU0 BU1 BU2(+)
BU0 BU1 BU2(+)
BU0 BU1 BU2(+)
BU0 BU1 BU2(+)
BU0 BU1 BU2(+)
BU0 BU1 BU2(+)
BU0 BU1 BU2(+)
BU0 BU1 BU2(+)
DM-FL
DM-FL
DM-FL
DM-FP
SIMOCODE pro - Communication