Identity Object - Siemens SIMOCODE pro Function Manual

Tables, data records
3.6 EtherNet/IP data tables
3.6.2

Identity object

The following information applies to the Identity object of the SIMOCODE pro V EtherNet/IP
device:
● Class code: 0x0001
● Class attributes: 1, 2, 3
● Number of instances: 1
Table 3- 88 Attributes of instance 1 for the Identity object
Attribute ID Access Name
1 Get Manufacturer
2 Get Device Type
3 Get Product Code
4 Get Revision
Major Revision
Minor Revision
5 Get Device_Status
6 Get Serial number
7 Get Product Name
Table 3- 89 Device_Status definitions for the Identity object
Bit (s) Query
0 Ownership
I/O communication is active
2 Configured
3 Reserved
4, 5, 6, 7 Extended device status
8 Minor rectifiable fault/error
9 Minor non-rectifiable fault/error
10 Serious rectifiable fault/error
11 Serious non-rectifiable fault/error
12 - 15 Reserved
314
Data type Value / comment
UINT 1251
UINT 0x03
UINT 2000
STRUCT of Device revision level
USINT
USINT
WORD Defined in the "Device_Status" definition table below
UDINT Device serial number
SHORT_STRING SIMOCODE pro V EIP
Definition
0 = Not owned
1 = Device has an owner
Always 0
0 = Device still in delivery state
1 = Configuration changed
Not supported
Not supported
Not supported
Serious problem with configuration such as module fault, configuring
error, parameterization error, temporary components fault
Serious device fault, e.g. basic unit hardware fault
Always 0
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003