Soft Starter With Reversing Contactor - Siemens SIMOCODE pro Function Manual

3.2.14

Soft starter with reversing contactor

Table 3- 17 Assignment of cyclic receive / send data, soft starter with reversing contactor
Cycl. receive data
Bit 0.0
Bit 0.1
Bit 0.2
Bit 0.3
Bit 0.4
Bit 0.5
Bit 0.6
Bit 0.7
Bit 1.0
Bit 1.1
Bit 1.2
Bit 1.3
Bit 1.4
Bit 1.5
Bit 1.6
Bit 1.7
Byte 2/3 *) (analog value)
Cycl. send data
Bit 0.0
Bit 0.1
Bit 0.2
Bit 0.3
Bit 0.4
Bit 0.5
Bit 0.6
Bit 0.7
Bit 1.0
Bit 1.1
Bit 1.2
Bit 1.3
Bit 1.4
Bit 1.5
Bit 1.6
Bit 1.7
Byte 2/3 (analog value)
Byte 4/5 *) (analog value)
Byte 6/7 *) (analog value)
Byte 8/9 *) (analog value)
*) for SIMOCODE pro V / pro S, basic type 1 only
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
3.2 Assignment of cyclic receive and send data for predefined control functions
Device parameters → Motor control → Control stations → PLC/PCS [DP] → ON <
Device parameters → Motor control → Control stations → PLC/PCS [DP] → OFF
Device parameters → Motor control → Control stations → PLC/PCS [DP] → ON >
Further function blocks → Standard functions → Test / Reset → Test1 - Input
Further function blocks → Standard functions → Emergency start → Emergency start - Input
Device parameters → Motor control → Control stations → Mode selector S1
Further function blocks → Standard functions → Test / Reset → Reset 1 - Input
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Status - ON<
Status - Off
Status - ON>
Event - Prewarning overload (I>115 %)
Status - Interlocking time active
Status - Remote mode
Status - General fault
Status - general warning
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Maximum current I_max
Not connected
Not connected
Not connected
Tables, data records
141