Data Transfer - Siemens SIMOCODE pro Function Manual

2.2.3

Data transfer

Options for data transfer
The following figure shows an overview of the communication functions supported by
SIMOCODE, which are described in the following sections:
Figure 2-10 Communication functions as exemplified by SIMOCODE pro V PN (GP)
1 Communication between PLC (IO controller) and SIMOCODE pro (IO device) via
PROFINET / Ethernet
2 Communication between PC with parameterization software SIMOCODE ES and
SIMOCODE pro via PROFINET
3 Communication between PC with parameterization software SIMOCODE ES Premium and
SIMOCODE pro via SIMATIC S7 (SIMOCODE pro integrated into SIMOCODE ES
(TIA-Portal))
4 Communication between PC parameterization software SIMOCODE and SIMOCODE pro
via the SIMOCODE pro system interface (point-to-point via RS 232 or USB)
5 Communication between PC or HMI with OPC UA Client and SIMOCODE pro via
Ethernet/OPC UA
6 Communication between PC with a web browser and SIMOCODE pro via TCP/IP and
HTTP
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Communication
2.2 PROFINET communication
45