Siemens SIMOCODE pro Function Manual page 89

OPC UA send
The bit information that is to be transferred to the client via OPC UA Send is also defined by
configuring with SIMOCODE ES.
OPC-UA variables (read):
● Send data byte 0, bits 0-7
● Send data byte 1, bits 0-7
Data from SIMOCODE PRO V PN (GP):
Figure 2-27
Example:
The feedback of the switching state of the motor is transferred to the client via OPC UA.
When selecting the variables in the OPC UA client, the assigned status signals are then as
follows:
Figure 2-28
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
OPC UA Send 0, 1 function blocks
Configuration of OPC UA Send in SIMOCODE ES
Communication
2.2 PROFINET communication
89