Process Image Input - Monitoring Data - Siemens SIMOCODE pro Function Manual

Tables, data records
3.5 Modbus data tables
3.5.2.2

Process image input - monitoring data

Access to the monitoring data is possible from the register memory area with function
codes 03 and 04, or the coil memory area with function codes 01 and 02.
Max. data length per access: 5 registers, 16 coils.
The process image output and the process image input can also be accessed via function
code 23 as a combined write/read access operation.
Table 3- 73 Process image input - monitoring data
Register high/low Coil
address address
0x0400 low 0x0400
0x0401
0x0402
0x0403
0x0404
0x0405
0x0406
0x0407
high 0x0408
0x0409
0x040A
0x040B
0x040C
0x040D
0x040E
0x040F
0x0401
0x0402
0x0403
0x0404
278
Type Designation
Bit Cyclic send - bit 0.0
Bit Cyclic send - bit 0.1
Bit Cyclic send - bit 0.2
Bit Cyclic send - bit 0.3
Bit Cyclic send - bit 0.4
Bit Cyclic send - bit 0.5
Bit Cyclic send - bit 0.6
Bit Cyclic send - bit 0.7
Bit Cyclic send - bit 1.0
Bit Cyclic send - bit 1.1
Bit Cyclic send - bit 1.2
Bit Cyclic send - bit 1.3
Bit Cyclic send - bit 1.4
Bit Cyclic send - bit 1.5
Bit Cyclic send - bit 1.6
Bit Cyclic send - bit 1.7
Word Float PLC/PCS analog
input 1
Word PLC/PCS analog.
Input 2
Word Float PLC/PCS analog.
Input 3
Word PLC/PCS analog.
Input 4
Default value
Status - On<
Status - Off
Status - On>
Event - overload
operation
Status - Interlocking
time active
Status - Remote
mode
Status - group fault
Status - group
warning
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
PLC / PCS Max. current I_max
analog FI input 1
Unassigned
PLC / PCS Unassigned
analog FI input 2
Unassigned
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Access
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r