Data Record 139 - Marking - Siemens SIMOCODE pro Function Manual

3.3.2.17

Data record 139 - Marking

For external faults, limit monitors, and monitoring functions of the temperature and analog
modules, user-specific texts can be configured for marking. The diagnostics
● External fault 1 to 6 (status information, warnings, and faults)
● Limit 1 to 4 (status information)
● TM warning T> / tripping T> (status information, warnings, and faults)
● AM Warning / tripping 0/4-20mA<> (status information, warnings, and faults)
can be parameterized to have various meanings, e.g. fill level >, bearing hot, etc. To simplify
diagnostics, these texts can be saved in the device. These can be created, read out and
displayed, for example, with SIMOCODE ES. The texts do not contain any functions.
You can access the following texts via data record 139:
Table 3- 39 Data record 139 - Marking
Byte.Bit Designation
0.0 Reserved
4.0 Reserved
10.0 Marking - External fault 1
20.0 Marking - External fault 2
30.0 Marking - External fault 3
40.0 Marking - External fault 4
50.0 Marking - External fault 5
60.0 Marking - External fault 6
70.0 Reserved
80.0 Reserved
90.0 Marking limit 1
100.0 Marking limit 2
110.0 Marking limit 3
120.0 Marking limit 4
130.0 Marking - TM warning T>
140.0 Marking - TM trip T>
150.0 Marking warning 0/4-20mA>
160.0 Marking - Warning 0/4-20 mA<
170.0 Marking - Trip 0/4-20 mA>
180.0 Marking - Trip 0/4-20 mA<
190.0 Reserved
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Tables, data records
3.3 Tables, PROFIBUS data records
Type Information
Byte[4]
Byte[6]
Byte[10] BU0 BU1 BU2(+)
Byte[10] BU0 BU1 BU2(+)
Byte[10] BU0 BU1 BU2(+)
Byte[10] BU0 BU1 BU2(+)
Byte[10] BU2(+)
Byte[10] BU2(+)
Byte[10]
Byte[10]
Byte[10] BU2(+)
Byte[10] BU2(+)
Byte[10] BU2(+)
Byte[10] BU2(+)
Byte[10] BU0 BU2(+)
Byte[10] BU0 BU2(+)
Byte[10] BU2(+)
Byte[10] BU2(+)
Byte[10] BU2(+)
Byte[10] BU2(+)
Byte[10]
197