Siemens SIMOCODE pro Function Manual page 321

Instance 150: Input assembly SIMOCODE basic type 1
The table below describes the format of attribute 3:
Byte Bit 7
0 Cycl. send
byte 0 -
bit 0.7
1 Cycl. send
byte 1 -
bit 1.7
2 ... 3 Cycl. send byte 2/3 - analog value 1
4 ... 5 Cycl. send byte 4/5 - analog value 2
6 ... 7 Cycl. send byte 6/7 - analog value 3
8 ... 9 Cycl. send byte 8/9 - analog value 4
The bit and analog values signaled by SIMOCODE pro to the control system via
instance 150 can be freely assigned in the SIMOCODE ES (TIA Portal) software.
Corresponding function blocks in the SIMOCODE ES (TIA Portal) charts:
Default settings of cyclic receive and send data: See Assignment of cyclic receive and send
data for predefined control functions (Page 128).
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Bit 6 Bit 5
Cycl. send Cycl. send
byte 0 - byte 0 -
bit 0.6 bit 0.5
Cycl. send Cycl. send
byte 1 - byte 1 -
bit 1.6 bit 1.5
Bit 4 Bit 3
Cycl. send Cycl. send
byte 0 - byte 0 -
bit 0.4 bit 0.3
Cycl. send Cycl. send
byte 1 - byte 1 -
bit 1.4 bit 1.3
Cycl. analog float input 1
Cycl. analog float input 2
Tables, data records
3.6 EtherNet/IP data tables
Bit 2 Bit 1
Cycl. send Cycl. send
byte 0 - byte 0 -
bit 0.2 bit 0.1
Cycl. send Cycl. send
byte 1 - byte 1 -
bit 1.2 bit 1.1
Bit 0
Cycl. send
byte 0 -
bit 0.0
Cycl. send
byte 1 -
bit 1.0
321