1.13.1.2 Registering the current position
1.13.1.3 Registering by entering a numerical value
1
Spot Welding Application Using a Motor Gun
1.13 Other Functions Using a Motor Gun
1. Press [3/FULL OPEN] or [-/SHORT OPEN] of the numeric keys.
– FULL OPEN POS SET window (or SHORT OPEN POS SET
window) appears.
2. Select a gun No. by pressing [PAGE].
3. Select a position to register a gun stroke and press [MODIFY] +
[ENTER].
1. Press [3/FULL OPEN] or [-/SHORT OPEN] of the numeric keys.
– FULL OPEN POS SET window (or SHORT OPEN POS SET
window) appears.
2. Select a position to register a gun stroke.
3. Enter a numerical value, and press [ENTER].
1-138
148 of 198