YASKAWA YRC1000 Operator's Manual page 14

1 Spot Welding Application Using a Motor Gun
1.2 Function Keys
The SHORT OPEN POSITION SETTING window appears
the first time this key is pressed.
The selection No. for the short open position is replaced by
pressing this key while the SHORT OPEN POSITION
SETTING window is appeared.
[INTERLOCK] + [SHORT OPEN]
The movable side tip moves to the selected short open
position.
The FULL OPEN POSITION SETTING window appears the
first time the key is pressed.
The selection No. for the full open position is replaced by
pressing this key while the FULL OPEN POSITION
SETTING window is appeared.
[INTERLOCK] + [FULL OPEN]
The movable side tip moves to the selected full open
position.
[INTERLOCK] + [WELD ALM RST]
A welder alarm reset signal is output to the welder while
these keys are held down.
[INTERLOCK] +[PRESSURE]
With the MANUAL PRESS window or the JOB window,
press these keys to execute pressurizing.
[INTERLOCK] +[RELEASE]
Executes releasing.
[INTERLOCK]+ [SEARCH]
Executes searching a work.
1-4
14 of 198